| Home | Who are we ? | Products around the bell | Tower clock products | Special and different manufactur | Campanist (Instalator) | Contact | Mamias in the press | Site maps |
-
Electromechanical tolling motor ; great striking capacity
-
Electromagnetic tolling motor, to be installed inside or outside of bell ; quick striking frequency
-
Lifting tolling motor, especially intended to equip external bells
Headstock (Pour plus d'informations cliquez ici)
Different types of headstocks allow different types of ringings : full swingings, retro, compensated, ...
Sounding lath shutter (Pour plus d'informations cliquez ici)
Laths made of oak or other wood, obliquely fitted in the openings of the bell tower to,
- on the one hand project the sound of the bells towards the ground, and
- on the other hand protect the bells’s chamber and the installation against the bad weather.
Belfry (Pour plus d'informations cliquez ici)
Frame work specially calculated and drawn for each site, taking into account the weight of bells, the type of swinging, the available place in the bell tower, the height of the openings, …
The belfry has to absorb as much as possible the thursts of the bells when swinging, in order to preserve the structure of the bulding.
Traditional manufacture in oak wood with mortice and tenon joint, wooden plugs, X wind braced
with notched halved joint.
Manufacture of metal belfries, mainly intented for external installations or new churches. Anti-corrosion treatment.
-
General electromechanical contactor
-
Emergency switch off button with warning light
-
Cartridge fuse
-
Calibrated thermic relay
-
Electric insulation of the installation when not in use
-
Automatic disconnection in case a phase is missing
-
Warning lights signalling of the installation working conditions
-
Switch on button for tests
Device allowing to ring a motionless bell striking her by means of a hammer installed inside or outside the bell.
Used for the hours ringings, half and quarter, Angelus, knell, tocsin,
Device allowing to ring a bell putting her in swing, the clapper coming to knock the bell.
Used for the merry ringings, the ceremonies, weddings, services and Angelus
Safety box approved control office
Allows to gather all in one electric unit placed in the bell chamber ; every individual protections of each electric motor, together with an emergency switch off button for safety purpose according to the regulation
-
Electromechanical swinging motor with contactor and reversing distributor, transmission by wheel and chain
-
Electromechanical swinging motor with electronic management, with electronic management and imput module and position sensor; transmission by wheel and chain
-
Linear swinging motor (new design) with electronic management with a static motor including induction coils and a sliding plate, with electronic management and input module and position sensor ; adjustment by console
Metal piece hung inside the bell and coming to knock the edge of the bell when swinging.
Made of soft steel, it is machined from the block and fitted to the weight of the bell.
It is hung in the bell thanks to a leather cope reinforced by a metal framework.
OUR PRODUCTS AROUND THE BELL
 |
 |
||||||
 |
 |
 |
 |
|
|||
 |
|
||||||
 |
|
||||||
 |
|
||||||
 |
|
||||||
 |
|
||||||
 |
|
||||||
 |
|
||||||
 |
|
||||||
 |
|
||||||
 |
|
||||||
 |
|
||||||
 |
|
||||||
 |
|
||||||
 |
|
||||||
 |
|
||||||
 |
|
||||||
 |
 |
|
|||||
 |
 |
|
|||||
 |
|
||||||
 |
|
||||||
|
|
|
|
|
|
|
|
|